This gloss white polyurethane solution is designed for heat transfer applications. It's conveniently compatible for printing with solvent, eco-solvent, and latex printers. It also features built-in blockers to prevent bleeding on polyester and poly-blend fabrics. Apply to cotton blends, polyester, spandex, and other blended materials for printed graphics that will last and stand out.
Unique Features
- 2.8 Mil Semi-Gloss to Full Gloss White Polyurethane with White Synthetic Liner
- Designed for Printing with Solvent, Eco-Solvent, and Latex Printers
- Contains Blockers to Prevent Dye Migration (Bleeding) with Polyester and Poly-Blend Fabrics
- Designed to Withstand 50+ Washings Without Cracking or Noticeable Fading
- Works with Cotton Blends, Polyester, Spandex and Other Blended Fabrics
- Can Be Die Cut and Weeded with Plotters
Applications
- Custom T-Shirts, Hoodies, and Apparel
- Canvas Signs
- Works with Cotton Blends, Polyester, Spandex and Other Blended Fabrics
Notes:
- Print and cut material right side up. Note: Do not reverse cut.
- Heat transfer graphic with heat press on to garment using firm pressure at 275° Fahrenheit for 15 to 25 seconds. Peel warm.
- Will not adhere to nylon, dazzle cloth, shiny polyester or moisture-wicking materials.
- Use any type of application tape to transfer graphics from release liner to garment. Do not remove application tape until graphic has been applied to garment. Let garment cool first before removing application tape.
- For improved durability reheat prints for 10-15 seconds at 275° Fahrenheit
- To ensure greatest durability, garments should be turned inside out and washed in gentle cycle, cold water and tumble dry. Avoid bleach or detergents containing bleach.