Designed specifically for Mutoh VC2-600 Plotter/Cutter, Mutoh VC2-1300 ValueCut II Plotter/Clutter and VC2-1800 ValueCut II Plotter/Clutter.
NOTE: These blades WILL NOT work for the following models - VC-600, VC-1300 or VC-1800.
To order blades for VC-600, VC-1300 or VC-1800 CLICK HERE. Please contact your outside sales rep if you need further assistance in ordering the correct blade(s).
RED CAP
- The blade is 45° with Red Cap, 0.25 mm offset and 2.5 mm blade diameter
- For cutting thick fluorescent and window tint film. Also for cutting detailed work in standard vinyl
GREEN CAP
- The blade is 60° with Green Cap, 0.50 mm blade offset and 2.5 mm blade diameter
- For cutting reflective vinyl, cardboard, sandblast, flock, and stencil sharp edge
BLUE CAP
- The blade is 60° with Blue Cap, 0.25 mm blade offset and 2.5 mm blade diameter
- For cutting thin sandblast mask and stencil. The blade with sharp angle and special design, allowing it to maneuver around sharp corners
BLACK CAP
- The blade is 50° with Black Cap, 0.175 mm blade offset and 2.5 mm blade diameter
- For Cutting small text and fine detail. Sharp blade with smallest offset
YELLOW CAP
- The blade is 25° with Yellow Cap, 0.25 mm blade offset and 2.5 mm blade diameter.
- For thin and delicate media such as window tint
- For more information on this product see data material below
Mutoh ValueCut II Plotter Blade Reference Guide - Current 2020
